Inovance HD380-5T0.7GB, Руководство пользователя, Страница: 245 / 298

Description of Function Codes
MD380 User Manual
- 244 -
• If F0-22 (frequency reference resolution) is 1, the display range is -3200.0–3200.0 Hz.
• If F0-22 (frequency reference resolution) is 2, the display range is -320.00–320.00 Hz.
F unction Code Parameter Name Display Range
U0-33 Synchronous motor rotor position 0.0°–359.9°
It displays the rotor position of the synchronous motor.
F unction Code Parameter Name Display Range
U0-34 Motor temperature 0–200 °C
It displays the motor temperature obtained by means of AI3 sampling. For the motor
temperature detection, see F9-56.
F unction Code Parameter Name Display Range
U0-35 Target torque -200.0%–200.0%
It displays the current torque upper limit.
F unction Code Parameter Name Display Range
U0-36 Resolver position 0–4095
It displays the current resolver position.
F unction Code Parameter Name Display Range
U0-37 Power factor angle -
It displays the current power factor angle.
F unction Code Parameter Name Display Range
U0-38 A BZ position 0–65535
It displays the phase A and B pulse counting of the current ABZ or UVW encoder. This value
is four times the number of pulses that the encoder runs. For example, if the display is 4000,
the actual number of pulses that the encoder runs is 4000/4 = 1000.
The value increase when the encoder rotates in forward direction and decreases when the
encoder rotates in reverse direction. After increasing to 65535, the value starts to increase
from 0 again. After decreasing to 0, the value starts to decrease from 65535 again.
You can check whether the installation of the encoder is normal by viewing U0-38.
F unction Code Parameter Name Display Range
U0-39 Target voltage upon V/ F separation 0 V to rated motor voltage
U0-40 Output voltage upon V/ F separation 0 V to rated motor voltage
They display the target output voltage and current actual output voltage in the V/F
separation state. For V/F separation, see the descriptions of group F3.