Manual LightDriver 5.0 EN
14
13.09.2018 V2.0 | innoflyer, weissensteinstrasse 81, 4500 solothurn | www.innoflyer.ch
Standby Mode
If activated, the LD5.0 enters the standby mode if the RC
signal is shut down (PWM off) and switches all 5 SLC off. If
the RC signal is turned back on (PWM on), SLC 1-5 restart
immediately. Optionally a timeout can be selected. The
timeout delays the shut down of SLC 1-5 after the RC
signal is lost by the selected period of time.
If a UVA is set, it rests activated in active standby mode.