Manual LightDriver 5.0 EN
12
13.09.2018 V2.0 | innoflyer, weissensteinstrasse 81, 4500 solothurn | www.innoflyer.ch
Important information regarding the SLC Settings
When using innoflyer aircraft LED lights in an active Plug&Play mode (with or
without an active MLT), le Light Driver 5.0 automatically operates the LEDs with
the correct current and carries out thermal monitoring.
If you are using Third-Party LEDs or old innoflyer light sources from the A2
series, you will need to switch the Plug&Play mode off and select the LED current
manually. If by accident you forget to deactivate the Plug&Play mode, the Light
Driver 5.0 will operate all non-system LEDs with a minimum current of 70mA.
Library
The "Presets" section of the Library features a selection of many frequently used
flash patterns. The "User" section enables you to manage your own creations and
to pull them up at the click of a button.
