Manual LightDriver 5.0 EN
16
13.09.2018 V2.0 | innoflyer, weissensteinstrasse 81, 4500 solothurn | www.innoflyer.ch
Output LED State
The following system states of the Light Driver 5.0 are displayed by the State
LED:
───......───......───......───......───......
Normal mode.
──────............──────............──────
Slave mode.
──....──....──....──....──....──....──....──
A temperature limiter is active.
The performance of at least one
LED is reduced.
─..─..─..─..─..─..─..─..─..─..─..─..─..─..─..
Bootloader active, no valid
Firmware found.
─....................─....................─.............
Standby mode
Key:
─
LED is on,
....
LED is off