Infoblox Infoblox-4030, Инструкции по установке

Страница: 9 / 24

Copyright ©2018, Infoblox, Inc.All right reserved.
Dimensions: 3.44" H x 17.54" W x 27.5" D (8.75 cm H x 44.55 cm W x 69.85 cm D)
Weight: Approximately 61.00 pounds (27.66 kg)
Ethernet Ports:
MGMT, HA, LAN1, LAN2 – auto-sensing 1000Base-TX (IB-4030)
MGMT, HA, LAN1, LAN2 – auto-sensing 10000Base-TX (IB-4030-10GE)
Environmental Specifications
Operating Temperature: 41 F – 104 F (5 – 40C)
Storage Temperature: -22 to 140 degrees F (-30 to 60 degrees C)
Operating Relative Humidity: 10% to 90% (non-condensing)
Electrical Power Specifications
Caution: Infoblox recommends provisioning power according to the AC or DC rated input current and maximum peak power values listed in the
specifications below.
AC Power Supply: 100 to 240VAC 750W (Maximum)
Rated Input Frequency: 50 Hz to 60 Hz
Rated Input Current: 8.9A at 100V AC, 4.3A at 200VAC
Rated Input Power: 857W at 100VAC, 824W at 200VAC
Maximum Heat Output (BTU/hour): 2925 BTU at 100VAC, 2812 BTU at 200VAC
Maximum Peak Power: 750 W at 100V to 240V AC input
DC Power Supply: 48v 750W GRND TERM, RING, VIN 12-10 AWG #10
Rated Input Voltage: 48VDC
Rated Input Current: 9.6A
Nominal Input Current: 17A
Maximum Inrush Current: 24A peak
Maximum Inrush Current Duration: 15ms
Maximum Power Draw: 820W at 48V DC input
Maximum Heat Output (BTU/hour): 2796 BTU
Maximum Peak Power: 750 W at 48V DC input
DC Power Cable Color Codes
DC power cables ship with a label describing each lead. The label is located near the pigtail leads. lists -48V DC power specifications. Table 6
Table 6 -48V DC Power Connector
Cable Pin Cable Color Description
1 Black Positive Return
2 Red Negative Input Voltage
3 Green/Yellow Safety Ground
Installing the Infoblox-4030 and Infoblox-4030-10GE
Note: The Infoblox-4030 and Infoblox-4030-10GE appliances must be installed in a four-post seismic rack.
Infoblox-4030 and Infoblox-4030-10GE appliances ship with mounting rails, side rails, and an accessory kit that contains mounting hardware. To