Copyright ©2018, Infoblox, Inc.All right reserved.
1.
Hard Disk Replacement
Use the following procedure to remove a spinning disk:
Press the red button on the disk drive, unlatch and pull the disk about two cm (one inch) to disengage contact, as indicated in
.
Figure 13
Figure 13 Pull disk latch to remove hard drive for Infoblox-4030/Infoblox-4030-10GE
2. Wait about 30 seconds for the disk to completely stop spinning.
3. Remove the disk, extract it from its carrier and handle it with care. Do not drop the disk or ship it loosely in a carton.
4. Securely mount the replacement disk in the drive carrier and replace the carrier in the system.
Changing AC Power Supplies
Note: Before changing power supplies, make sure that they are securely cabled. An apparently failed power supply may simply be improperly
connected to its power source.
The Infoblox-4030 and Infoblox-4030-10GE appliances ship with two redundant, auto-switching AC power supplies or optional DC power supplies,
in a 1+1 configuration. The power supplies are "hot-swappable", so you can remove or replace one power supply without interrupting appliance
operation and network services.
When a power supply fails for any reason, NIOS displays a power supply alarm. The Infoblox NIOS Dashboard will also display an Error under
Grid Status. An email notification will be sent and an SNMP Trap will be reported.
When the appliance contains two functioning power supplies, they share the power load. If one power supply fails, the other assumes the full load
automatically and the appliance sends the system alarm to NIOS. Although the appliance can run with only one power supply, Infoblox
recommends installing both power supplies that are shipped with the appliance. This configuration minimizes the chance of system failure due to
failure of an individual power supply.
Each power supply weighs about three pounds (1.36 kg). The faceplate of the power supply contains a power LED and a power switch. Each AC
power supply provides a dedicated male power outlet.
illustrates the process of replacing an AC power supply.
Figure 14
Figure 14 Removing an Infoblox-4030/Infoblox-4030-10GE AC Power Supply
Содержание Infoblox-4030
Страница 24: ...Copyright 2018 Infoblox Inc All right reserved...
