Infoblox Infoblox-4030, Инструкции по установке

Страница: 7 / 24

Copyright ©2018, Infoblox, Inc.All right reserved.
Note: summarizes SFP and SFP+ support for Infoblox appliance models. Table 5
Connector Pin Assignments
As noted, the Infoblox-4030 and Infoblox-4030-10GE appliances provide the following ports on the rear panel:
USB ports (reserved for future use)
Male DB-9 console port
Four (4) active RJ-45/SFP/SFP+ 1000Base-T/10000Base-T auto-sensing Ethernet ports, depending on ordered appliance configuration
Active 10/100/1000 iLO/IPMI port
Figure 6 describes standard DB-9 connector pin assignments. DB-9 pin assignments follow the EIA232 standard.
Figure 6 DB-9 Pin Assignments
SFP/SFP+ Interfaces
Note: In Infoblox-4030-10GE appliances, always install your transceivers in the ports before turning your system on for the first time. Install the
same transceiver type in both the LAN1 and HA ports. If you are not using HA, the HA port can be left without a transceiver.
The Infoblox-4030 and Infoblox-4030-10GE appliances ship with four (4) SFP or SFP+ Gigabit Ethernet interfaces and matching transceivers,
depending on the appliance model and the ordered configuration. Depending on chosen options, SFP and SFP+ interfaces support the following
Infoblox-sold transceivers (other supported third-party transceivers are listed in
). Infoblox Appliance SFP/SFP+ Transceivers
Table 4 SPF/SFP+ Transceiver Specifications