Infoblox Infoblox-4030, Инструкции по установке

Страница: 4 / 24

Copyright ©2018, Infoblox, Inc.All right reserved.
Figure 2 Infoblox-4030/Infoblox-4030-10GE with Front Panel Cover Removed
The front panel components are described in . Table 1
Table 1 Front Panel Components
Component Description
UID Button and LED The unit identification button and LED. Pressing the UID button illuminates the blue UID LEDs on the front and rear
panels.
In a rack environment, the UID feature enables easier location of a server when moving between the front and rear of
the rack.
Blue = UID is activated Dark = UID is deactivated
System Health LEDs These LEDs identify the overall health of the system. Green = Normal
Amber = System is degraded
Red = System is in critical condition
Power On/ Standby
Button and Power
LED This LED indicates whether the power is on. Green = System is on
Amber = System is in standby mode Dark = System has no power supply
Disk Drives Four (4) hot-swappable hard disk drives configured in a RAID (Redundant Array of Independent Disks) 10 array. For
information about RAID 10 array, see
Managing the Disk . Subsystem
Drive LEDs Each disk drive has one Fault/UID LED (green/amber) that indicates the connection of the disk drive, and a circular
Online/Activity LED (green) that goes around the Fault/UID LED to indicate read/write activity status of the disk drive.
VGA Port This port is not supported. Use the console port or LAN1 port for initial setup.
Disk Drive LEDs
The disk drives are located on the appliance front panel. lists the disk drive LED combinations and the states they represent. Table 2
Table 2 Disk Drive LED Combinations
Online/Activity LED (Green) Fault/UID LED (Green/Amber) Description
Off or circulating green Steady green The drive is operating normally.
Off or circulating green Steady amber The drive has failed, or it has received a predictive failure alert.
Rear Panel
The Infoblox-4030 and Infoblox-4030-10GE appliances offer a choice of dual AC power supplies or dual DC power supplies. Power supplies are
hot swappable; any single power supply can be replaced without disrupting appliance operations.
The Infoblox-4030 and Infoblox-4030-10GE provide four (4) active SFP Gigabit Ethernet interfaces that operate as Infoblox MGMT, LAN1, HA,
and LAN2 ports in the Infoblox system. Port assignments are from left to right and reflect standard Infoblox port assignments as shown in
Figure 3
and listed in . Table 3