User Guide
51 of 67
002-32601 Rev. *C
2021-12-02
EZ-
PD™ PMG1 MCU prototyping kits guide
CY7110/CY7111/CY7112/CY7113
Application development on CY711x kits using ModusToolbox™ software
Figure 44
Selecting debug attach and starting a debug session
9.
ModusToolbox™ software acquires the kit in d
ebug mode and the debug tools appear on the toolbar.
5.3.3
Programming using CYPRESS™ programmer (CYP)
CYP v4.0 or higher supports programming of the EZ-
PD™
PMG1 MCU prototyping kits and EZ-
PD™
PMG1 MCU
devices. Do the following to program the prototyping kit using the KitProg3 interface from the CYP.
1.
Connect the power section jumper (J5) to position 2
–
3 (VIN).
2.
Connect the prototyping kit to the host PC through the KitProg3 connector. See
3.
Launch CYP. See the user guide
for the detailed procedure to download and install CYP.
4.
From the
Probe/kits
drop-down list, select the connected prototyping kit. Based on the selection, the
Platform
will display PMG1 and the
Log
panel will display the selected device/kit/probe name.
