User Guide
34 of 67
002-32601 Rev. *C
2021-12-02
EZ-
PD™ PMG1 MCU prototyping kits guide
CY7110/CY7111/CY7112/CY7113
EZ-
PD™ PMG1 prototyping kit system design
provide liquid tolerance and proximity sensing support. The driven shield feature can be enabled on the kit by
populating series resistors and removing the ground connections. The CTANK capacitor also needs to be
connected for enabling the drive-in shield feature.
Table 13
Component and associated feature
Component
Associated feature
GPIO
LED GPIO
CMOD
Self-capacitance sensing
P5.1
2.2 nF capacitor connected to CMOD pin
CTANK
Driven shield, liquid
tolerance, and proximity
sensing
P5.0
10 nF capacitor connected to CTANK pin
through “no load” component. Populate R19 to
enable CTANK
SHIELD1,
SHIELD2
Driven shield, liquid
tolerance, and proximity
sensing
P5.2
Shields are connected to the ground through
resistors (R63, R80). Remove ground connection
and populate series resistor (R66, R77) to enable
driven shield
