Infineon CY7110, Руководство пользователя

Страница: 57 / 67

User Guide 57 of 67 002-32601 Rev. *C
2021-12-02
EZ- PD™ PMG1 MCU prototyping kits guide
CY7110/CY7111/CY7112/CY7113
Application development on CY711x kits using ModusToolbox™ software
3. Launch CYP. See the user guide [10] for the detailed procedure to download and install CYP.
4. From the Probe/Kits drop-down list, select MP4 BULK . And select PMG1 from the platform drop-down list.
5. Click Open to load the programming file. In the Open Programming File dialog, browse to the location of the
HEX, SREC, ELF, or BIN file to be loaded. Select the file and click Open .
6. Under Program Settings , select Programming Mode according to the connected kit
a)
Power cycle for CY7110
b)
Reset for CY7111, CY7112, and CY7113
See Figure 53 for more details.
Figure 53
Configuring CYP to program EZ- PD™ PMG1 MCU kits
7. Click Connect . The CYP connects to the target board and the Erase , Program , Read , and Verify options
appear.
8. Click Program to initiate firmware update. The message Device Programmed successfully appears on the
bottom left once the programming is completed.