24
ISOFIX Compatible Restraint
Infant Seat
Step 5:
Step 6:
Step 7:
Push down on the Base (with knee or hand) whilst
pulling the adjuster strap firmly. Remove all slack
from the LAC straps by pulling the adjuster strap
firmly. The
GREEN
indicator is activated (refer
Figure 5 & 6).
Repeat for both side of the Base.
Close and secure ISOFIX cover (refer Figure 7).
IMPORTANT
!
The purchaser should check the
measurements between the front of the
seat back of the rear seat and all front
seats in the car in which the child restraint
is intended to be used, to ensure that the
space is sufficient.
Care and attention should be given to
sufficient ventilation and shading of the
baby.
Always secure the loose end of the top
tether strap to prevent it hanging out of
the car or being accessible by the child.
IMPORTANT
!
For removal of LAC straps from vehicle
‘PULL’ the red strap to detach from
anchorage point and store in the
compartment beneath the seat.
Installing Base using flexible ISOFIX Lower Anchorage Connectors (LAC)
To Lengthen
To Tighten
PRESS
PULL
PULL
PRESS
PULL
REMOVE ALL SLACK FROM LAC STRAP
Figure 7
Green
Indicator
Figure 6
Figure 5
PUSH
PULL
RED STRAP
TO RELEASE
