31
Following the Preparing the Harness (refer Page 26)
Place the Infant Carrier on a flat surface.
Ensure the carry handle is folded out of the way and
the Hood is fully opened, to enable complete access
to the seat (refer Figure 1).
Loosen the harness straps by pressing the harness
adjuster whilst pulling on both harness straps (Refer
Figure 2).
Release the buckle
Lay the two harness straps (with tongues) to the
sides of the Infant Carrier (refer Figure 3).
Place the infant into the Infant Carrier, flat on their
back, with the buckle positioned between the
infant’s legs. Ensure the infants arms and legs are
free.
NOTE:
Discontinue using the insert when the insert
is a tight fit or creates discomfort for larger
babies/children.
Using Harness
Use
Infant Seat
IMPORTANT
!
• Do not harness an infant wrapped in a blanket or
swaddled as this increases the risk of ejection
and injury or death in a crash.
• The harness needs to fit firmly to the infant,
any blanket or other covering may be placed
over the harness after the harness is correctly
adjusted.
• Arms and legs must be free and not bound or
wrapped together.
• The legs must sit on each side of the buckle
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Figure 3
Figure 2
PULL
PRESS
Figure 1
Figure 4
