21
Push down on the Base (with knee or hand) whilst
pulling the sash section of the vehicle belt firmly in
direction of the blue arrow in Figure 5.
(This will tighten the lap belt across the Base).
Ensure the excess slack in the sash belt is removed
by feeding back towards the seat belt retractor (refer
Figure 5).
Ready for Use (refer Figure 6).
Engage the buckle and tongue assembly (listen for
the “CLICK”). Check the buckle engagement with a
gentle pull.
Step 7:
Step 6:
Step 8:
Step 9:
Installation
Infant Seat
“CLICK”
PULL
3
1
2
Installing Base Using Vehicle Seatbelts
Figure 4
Figure 5
Figure 6
PUSH
PULL
1
2
PUSH
REMOVE ALL SLACK FROM SEATBELT
ALTERNATIVELY
LAP ONLY INSTALLATION
