Platinum™ IP3
Installation and Operation Manual
1500 Watt Power Supply and External Power Supply Frame
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 277
Power Distribution Modules
Power Distribution Modules
are the interface between
PX-PS Power Supplies
in the
IP3
frame and the
PX-FR-EXPS
. Power Distribution Modules are connected to the
PX-BP-28/PX-BP-15 MI
backplane,
eliminating the need for the separate connectors and wiring.
Top Power Distribution Module (PX-PD-TOP)
The
Top Power Distribution Module
(
PX-PD-TOP
) is used both in the
PX-FR-28/PX-FR-15
IP3 frames and
in the
PX-FR-EXPS
External Power Supply Frame.
Figure 123:
PX-PD-TOP - Power Distribution Module (shown with wires)
DIP Switches on the PX-PD-TOP
There are
four DIP switches
,
SW1 to SW4
, on the PX-PD-TOP Top Power Distribution board.
CAUTION
: The DIP Switch must be in a specific position depending on whether the PX-PD-TOP is used in
the IP3 frame or the PX-FR-EXPS External Power Supply Frame.
When the
PX-PD-TOP
is used in the PX-FR-EXPS frame, all switch positions should be set to
CLOSED/ON
.
