Platinum™ IP3
Installation and Operation Manual
Frame Synchronizer and Demultiplexing Input Modules (PT-FSDMX-IBG/PT-FSDMXO-IBG, PT-FSDX8C1D-IBG, PT-FSDMX8O1D-IBG)
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 159
Group (1-4) Deembedding Control
The following table describes options for the
Group
(1–4)
Deembedding Control
parameter.
Table 75:
Deembedding Control Options
Item
Description
Repeat
Upon detection of a de-embedding error, the de-embedder repeats
the last good AES sample.
Mute
Upon detection of a de-embedding error, the de-embedder mutes the
current outgoing AES sample.
Audio Test Tones
The following table describes the frequency and levels of each audio output test tone, available as a
selection from each of the
Output Ch
(
1–16
)
Source Select
parameters:
Table 76:
Audio Test Tones
Test Tone
Frequency
Test Tone 1
400 Hz
Test Tone 2
1 kHz
Test Tone 3
2 kHz
Test Tone 4
4 kHz
Fast Video Switch
When input video is switched between two sources while both sources are within vertical blanking, use
the Fast Switch parameter to enable fast video switching between the sources. In this mode, output
video is not frozen when both sources are within the vertical blanking area when the switch takes place.
