Imagine Platinum IP3, Инструкция по установке и эксплуатации

Страница: 216 / 315

Platinum™ IP3
Installation and Operation Manual
Analog/Digital Audio Converter Modules with TDM
© 2016 Imagine Communications Corp. Proprietary and Confidential. September 2016 | Page 216
Parameter Description R/W Options
Ext. Reference Lock Error Reports lock error on external reference RO

No

Yes
Ext. Reference Validity Error Reports validity error on external
reference RO

No

Yes
Ext. Reference Confidence Error Reports confidence error on external
reference RO

No

Yes
Ext. Reference Biphase Error Reports biphase error on external
reference RO

No

Yes
Ext. Reference Parity Error Reports parity error on external reference RO

No

Yes
Operating Mode
Sets PM-ADCT-IB/PT-ADCT-IB operating
mode
RW

Auto

Internal

External
0dBFS setting Sets 0 dBFS setting for analog to digital
conversion RW 13 dB to 28 dB in 1 dB
increments
Presence Hysteresis (1-16)
Sets the time duration between
acquisition of signal presence and release
of audio muting
RW
7.5 ms to 32.76 s in 500
ns steps
Silence Delay (1-16)
Sets time duration between loss of signal
presence and audio muting
RW
7.5 ms to 32.76 s in 500
ns steps
Silence Disable (1-8) Disables feature of generating AES silence
when signal is not present (wideband
mode only) RW

No

Yes
Threshold (1-8) Sets signal presence threshold (all inputs) RW 0x00 to 0x7F
Sample Frequency Adjust Adjusts internal mode sampling frequency RW 0x00 to 0xFF
Sampling Frequency Select Sets the sampling frequency when in
internal mode RW

32 kHz

44.1 kHz

48 kHz

88.2 kHz

96k Hz

192 kHz
Audio Reference Selects AES reference input for source RW

Sync 1

Sync 2

Sync 3

Sync 4
Parameter Hysteresis Sets hysteresis for parameters needing it RW 0 to 5 seconds in 500 ns
steps