ILX Lightwave LDC-3908 страница 49 Скачать руководство пользователя | Manualshive

Страница: 49 / 58

background image

C O M M A N D R E F E R E N C E

LDC-3908 Mainframe Command Reference

34

LDC-3908

C H A P T E R

4

!

The MENU command causes the front panel display to switch to the specified menu.

Parameters

An <nrf value> which represents the front panel menu selections. 1 = Channel Menu, 2 = Status
Menu, or 3 = Summary Menu.

Notes

This command is useful for visually monitoring activity from the front panel while in remote
operation.
The channel used (when the parameter is 1) is the remotely selected channel, not the last front
panel selected channel (see “Channel” command).

Examples

“Menu 1" -action: sets the front panel display to the remotely selected channel's main menu.
"MENU 2" -action: sets the front panel display to the Status menu.

The MESsage command allows the user to enter an ASCII string of up to 15 non-zero characters.
This command may be useful for storing messages which relate to a test or configuration.

Parameters

An ASCII string that is 1 - 15 bytes in length.

Notes

The string of characters must be in quotes.

Examples

MESSAGE “This is a test.” -action: The string, “This is a test.”, will be stored in non-volatile
memory.
Mes "Test 3 " -action: The string, "Test 3 ", will be stored in non-volatile memory.

The MESsage? query returns the previously stored message. This message will always be 16 bytes
long and enclosed in quotes. The message is entered via the MESsage command.

Parameters

None. The response is the character string that was entered using the MESsage command.

Examples

“MES?” -response: “Test 3", means the previously stored message was “Test 3".
"Message?" -response: "This is a test.", means the previously stored message was, "This is a test."

The MODERR? query returns a list of “module” device and command errors. The “module” errors
are those which have occurred since the last “MODERR?” query. The errors are notated by a
number (code) which corresponds to the type of error which occurred. See the appropriate module
instruction manual for information regarding error handling for each specific module.

Parameters

None. The response consists of one or more “module” error code values, separated by commas.

Notes

A response of “0” indicates that no errors were reported. The response data is sent as character
data.

Examples

“MODERR?” -response: 0 means no “module” errors reported.

MENU

F

RONT

P

ANEL

R

EMOTE

MESsage

F

RONT

P

ANEL

R

EMOTE

MESsage?

F

RONT

P

ANEL

R

EMOTE

MODERR?

F

RONT

P

ANEL

R

EMOTE

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
47
48
49
50
51
...
»

Содержание LDC-3908



























































Отзывы:

Нет отзывов

Похожие инструкции для LDC-3908

Бренд: Wavetec Страницы: 17

Бренд: Calsense Страницы: 9

Smart Controller

Бренд: MaestroHome Страницы: 10

Бренд: Barthelme Страницы: 8

Бренд: CAB Страницы: 28

Бренд: C-TEC Страницы: 16

Бренд: C&T Solution Страницы: 27

SECURIT ST800L+

Бренд: C&K systems Страницы: 16

Бренд: Union Instruments Страницы: 63

Бренд: ZKTeco Страницы: 20

Бренд: ZKTeco Страницы: 8

Бренд: ZKTeco Страницы: 10

Бренд: ZKTeco Страницы: 121

Бренд: ZKTeco Страницы: 12

Бренд: ZKTeco Страницы: 6

Бренд: ZiLOG Страницы: 12

Real Living iM1

Бренд: Yale Страницы: 2

Total Access 351 Series

Бренд: ADTRAN Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды