ILX Lightwave LDC-3908, Руководство пользователя

Страница: 34 / 58

LDC-3908
19
!
C H A P T E R
3
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
O
PERATING IN
R
EMOTE
C
ONTROL
Everything you learned to do from the front panel can also be done remotely and in some cases
with more flexibility. For instance, in remote mode you have access to commands for functions not
found on the front panel. The following sections show you the fundamentals of operating your
LDC-3908 Laser Diode Controller remotely through the GPIB and RS-232 interfaces.
GPIB Configuration
Before you can operate the LDC-3908 from a remote location with GPIB, you need to know its GPIB
address. The following sections describe reading and changing the GPIB address of the LDC-3908.
Reading the GPIB Address
1 Press MAIN from the front panel to recall the Main Menu.
2 Press the Sys. Config soft key, to reach the System Configuration menu.
3 Press the Comm. soft key to access the Config. Comm menu. The mainframe displays
the GPIB Address on the Config. Comm menu.
Changing the GPIB Address
Every device on the GPIB bus must have a unique address. The default address from the factory is
address “01”.
1 Press Main from the front panel to recall the Main Menu.
2 Press the Sys. Config soft key, to reach the System Config. menu.
3 Using the PREV/NEXT keys, highlight GPIB Address .
4 Select the desired address using the Adjust Knob.
The new GPIB address is stored in non-volatile memory. The allowable address range is 0-30 for
primary GPIB addressing. Extended GPIB addressing is not implemented on the LDC-3908 at this
time.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com