_____________________________________________________________________________________________________________________________________________________________
NetDVR User Manual
78 / 97
19
Network Redundancy Record
19.1
Continuous Record Setup
Continuous Record means always record the video, the operation is simple. You get video connection, get video record. You just enter Camera Setup page
Group
Setup, choose camera group and cameras, click the icon “Continuous Record” then slide the mouse to set time table. The operation in Live Center is similar.
19.2
Motion Detect Alarm Record Setup
Motion Detect Record is a little bit complicated than Continuous Record because HVR system need additional signal to analyze the video stream type. So you must
configure 2 places. One place is Motion Record setup in HVR system “Camera Setup” page, similar to Continuous Record setup. Another place is Motion page as
below,
For your attention, the key item “Upload to center” must be checked on, otherwise your settings only apply to local SD card motion record.
