_____________________________________________________________________________________________________________________________________________________________
NetDVR User Manual
57 / 97
You may setup privacy mask to mask off sensitive or private areas in the field of view of a camera. To setup privacy mask:
1)
Click Menu > Settings > Camera to enter the Camera Settings menu.
2)
Click the
Advanced
tab to enter the Advanced Camera Settings menu, as shown in Figure1. Select channel for privacy mask settings in
Camera
.
3)
Check the
Mask
checkbox to enable feature.
4)
Click the
Area Settings
button to enter Area Settings menu.
5)
Set mask area, as shown in Figure 12.4. Up to 4 areas can be set.
6)
Select
Exit
to save settings and exit the Mask Area Settings interface.
Figure 12.3. Advanced Camera Settings Menu Figure 12.4. Setting Mask Area
13
HDD Management
13.1
Initializing HDDs
A newly installed hard disk drive (HDD) must be first initialized before it can be used with your DVR. Initializing the HDD will erase all data on it. To initialize a HDD:
1)
Click Menu > HDD to enter the HDD Management menu, shown in Figure 13.1.
2)
Select HDD to be initialized.
3)
Click the
Init
button.
4)
Select
OK
button to start initialization. After the HDD has been initialized, the status of the HDD will change from
Abnormal
to
Normal
.
13.2
Set HDD Groups
