_____________________________________________________________________________________________________________________________________________________________
NetDVR User Manual
23 / 97
To shut down the DVR:
1)
Enter the
Shut Down
menu, shown in Figure 1 by clicking on Menu > ShutDown.
2)
Select the
Shutdown
button.
3)
Click the
Yes
button.
4.2
User Name and Password
When NetDVR is delivered from factory, there is only one default administrator named “admin” setup.
Its default password is “12345”. This administrator name cannot be modified but its password can be modified.
4.3
Running Setup Wizard
Please make sure the DVR has been installed with HDD before access to the Setup Wizard. By default, the Setup Wizard will start once the DVR has loaded, as shown in
Figure 4.3.1. The Setup Wizard will guide you through some important settings of your DVR. Select
Next
if the DVR has been installed with HDD, or click
Cancel
to access
Live View window if no HDD is installed.
If the checkbox is check-off to
, then the Setup Wizard dialog box will not appear next time until the factory default settings are resumed; and if you select the checkbox
check-on to
, the device will automatically access the Setup Wizard dialog box when it starts up next time.
Figure 4.3.1. Figure 4.3.2
To start using the Setup Wizard:
1)
Click the
Next
button on the Wizard window. This will take you to the
User Permission
window, shown in Figure 4.3.2.
2)
Navigate to the Admin Password text box. Type the admin password into the Admin Password text box. By default, the password is 12345.
3)
To change the admin password, check the New Admin Password checkbox. Type new password and confirm it in the given text boxes.
