_____________________________________________________________________________________________________________________________________________________________
NetDVR User Manual
51 / 97
2)
Select the
Advanced
tab.
3)
Click the
Set
button next to
Host/Others
to enter the Host/Others menu.
4)
Set
Multicast IP
, as shown in Figure 10. When adding a device to the Network Video Surveillance software, the multicast address must be the same with the DVR’s
multicast IP.
5)
Click
OK
to save settings and exit the Host/Others menu.
10.7
Configuring Server and HTTP Ports
If you would like to change the server and HTTP ports from the default settings, you can do so in the Network Settings menu. The default server port is 8000 while the
default HTTP port is 80. To change the default ports:
Figure 10.10. Host/Others Menu
1)
Click Menu > Settings > Network to enter the Network Settings menu.
2)
Select the
Advanced
tab.
3)
Click the
Set
button next to
Host/Others
to enter the Host/Others menu.
4)
Enter new
Server Port
and
HTTP Port
, as shown in Figure 10.10.
Note:
The Server Port has a port range of 2000-65535 and is used for remote client software access. The HTTP port is used for remote Internet browser access.
