_____________________________________________________________________________________________________________________________________________________________
NetDVR User Manual
52 / 97
11
PTZ Control
PTZ menus can be navigated through with either the mouse or the front panel/remote. For quick access to certain PTZ settings, right clicking with the mouse in a display
while in PTZ control mode will enter the PTZ settings menu. The items that can be found on this menu include:
•
Camera:
Select a PTZ camera.
•
Call Preset:
Call a PTZ preset.
•
Call Patrol:
Call a PTZ sequence.
•
Call Pattern:
Call a PTZ pattern.
•
Preset Settings:
Enter PTZ preset configuration menu.
•
Patrol Settings:
Enter PTZ sequence configuration menu.
•
Pattern Settings:
Enter PTZ pattern configuration menu.
•
PTZ Menu:
Enter PTZ control menu.
•
PTZ Settings:
Enter PTZ settings menu.
Figure 11.1. PTZ Settings Menu Figure 11.2. PTZ Control Interface
11.1
Configure PTZ Settings
Settings for a PTZ camera must be configured before it is used. Before proceeding, verify that the PTZ and RS-485 of the DVR are connected properly. To configure PTZ
settings:
1)
Click Menu > Settings > PTZ to enter the PTZ Settings menu, shown in Figure 11.1.
2)
Select channel where PTZ camera is installed next to
Camera
label.
