_____________________________________________________________________________________________________________________________________________________________
NetDVR User Manual
64 / 97
14.4.1 Add a New User
To add a new user click Menu > Settings > User to enter the User Settings menu, shown in Figure 14.4.
1)
Select the
Add
button to enter the
Add User
menu, shown in Figure 14.5.
2)
Enter information for new user, including
User Name
,
Password
,
Level
and
User’s MAC
.
3)
The
Level
is the user level and is separated into two tiers.
•
Operator:
By default, the Operator user level has the authority to configure two-way audio in network settings and all parameters in channel settings.
•
Guest:
By default, the Guest user can not configure network settings, but can configure the local playback as well as the remote playing in channel settings.
4)
If
User’s MAC
is configured and enabled, the user may only access the DVR from that particular MAC address.
5)
Select the
Permission
button to enter the Permission Settings menu, shown in Figure 14.6.
6)
Configure permission for local settings under
Local Permission
tab. The local settings include:
•
Local Log Search:
Search and view logs of DVR.
•
Local Configuration:
Configure and restore parameters to factory defaults. Introduce settings to or export settings from DVR.
•
Local Advanced Operation:
HDD management (including the initialization and changing the properties of a disk). Ability to update system firmware as well as to
stop the relay output
•
Local Shutdown/Reboot:
Shutdown or reboot the DVR.
Note:
If you forget the password to your DVR, contact your supplier with the serial number of your DVR to obtain a secure code to reset your DVR.
Figure 14.5. Add User Menu Figure 14.6. Permission Settings Menu
