_____________________________________________________________________________________________________________________________________________________________
NetDVR User Manual
46 / 97
•
Illegal Login:
Incorrect user ID or password used.
•
Video Output Standard Mismatch:
video output standards do not match with each other.
To set exceptions:
1)
Click Menu > Settings> Exception to enter the Exception menu.
2)
Select the exception to configure under
Exception Type
.
3)
Select triggering options, as shown in Figure22. Trigger options are further explained in the next section (See
Understanding Exception Trigger Options
).
4)
Click
OK
to save settings and exit Exception menu.
Figure 9.21. Exception Menu
9.7 Understand Exception Trigger Options
When setting up exception handlers for such features as motion detection and relay alarms, you may select triggering options to alert you of these exceptions. The triggering
options that you may select include:
•
Pop-up Image on Monitor:
When an alarm is triggered, the local monitor (VGA or BNC monitor) will display an image in Live Preview mode. This alarm can be
configured under the Popup Alarm Image handle method. For alarms that are triggered simultaneously, images will be displayed one at a time every 10 seconds
(default dwell time). A different dwell time can be set by going to Menu > Setting > Display > Dwell Time. Once the alarm stops, cycling of the images will also stop
and you’ll be returned to the Live Preview screen.
•
Audio Warning:
Trigger an audible
beep
when exception is detected.
