Ikegami OCP-300, Руководство по эксплуатации

Страница: 122 / 274

9-5 9. How to Use the Memory Card
5. Turn on the [Save] switch.
6. Input the file name by using the switch and the rotary encoder knob on the LCD
screen.
7. Press the [Execute] switch.
The [Execute] switch light on. The LCD screen displays the file name and the
execution status, and the file data is saved.
$%&'()*+$//
6DYLQJ
After the completion, the LCD screen indicates the completion status, and the
buzzer sounds. The indication lasts for approximately 1.5 seconds and disappears.
$%&'()*+$//
&RPSOHWH
Note
: When the file data with the same data exists, the following warning is
indicated. Pressing "Yes" overwrites the file data. Pressing "No" cancels the
saving operation.
$%&'()*+$//
Cursor
File name
When no name is selected,
the file name is automatically
set.
Extension
Any name can be used for the extension.
When no name is selected, the name
becomes as follows according to the file type.
“ALL” (ALL FILE), ”LNS” (LENS FILE),
“SNP” (SNAP SHOT), ”SCN” (SCENE),
and “REF” (REF LEVEL).