Ikegami OCP-300, Руководство по эксплуатации

Страница: 112 / 274

8-3 8. Manual Setting/Manual Clearing
8.2 Indication of the Control Data Offset
When the [Offset] switch on the MAN. SET/CLR screen is turned to "ON" (amber), the
control data indication value becomes the deviation from the value registered by the
manual setting (or the value automatically adjusted by the automatic setup) (offset
indication mode). When this mode is on, you can check the adjusted amount from the
set value registered in the manual setting at a glance. If the indication value is "0,"
that means the registered setting is used.
You can switch ON and OFF of the offset indication mode alternately by pressing the
[Offset] switch.
When the offset indication mode is on, the control data is indicated in blue. The
indication of the selected item remains in red.