Ikegami OCP-300, Руководство по эксплуатации

Страница: 45 / 274

3. Network 3-4
3.1.3 Setup of ARC Net ID
A total of 255 nodes (equipment) are connectable with one network (The node as a
hub function does not count). You have to set ARC network ID to the equipment
(node) connected by an ARC network command. A setup of ARC network ID is
possible for 01h-FFh (in the case of decimal digit, 1-255).
Caution
: Only one ARC network ID can be set to the same network. When ARC
network ID overlaps, it may cause not only malfunction of duplicate
equipment but malfunction of the equipment connected with the same
network.
1) Setup of OCP-300
Reference
: Refer to "11.1 The Setup of ARC Net ID" for the setup of ARC net ID
of OCP-300.
2) Other instrument setups
Reference
: Refer to the operation manual of each equipment such as
"CPH-200/BSH-200 Setup Manual" etc.
3.1.4 Network Connection
On the occasion of network connection, there are bus connection, star connection and
tree connection.
Reference
: Refer to the operation manual of each equipment such as
"CPH-200/BSH-200 Setup Manual" etc. for the details of network
connection.
࣭
Connection with CPH-200 (CP hub)
Connect it by a CP cable between OCP-300 and CPH-200 (CP hub).
Please connect CPH-200 to the CP connector and connect the control panel to the
COMMAND connector.
The maximum length of the cable is 50 m. The minimum is 1 m.