Ikegami OCP-300, Руководство по эксплуатации

Страница: 250 / 274

22-4 22. Countermeasure against troubles
Caution
Each setting of panel configuration has resumed to the factory settings.
Perform setting again as necessary. This operation does not initialize the
clock function. It will be automatically initialized in the event of
abnormality.
The number of BS/CCU is set to "1" when this operation is performed in
network connection. Perform setting again.
Pressing the [RAM Clear] switch on the Preset File screen in the LCD screen followed by
pressing [Execute] clears RAM.
22.4 "RAM Data Break" is Displayed
Data in backup RAM region is automatically checked at power start-up.
The following window is displayed on screen if the data is corrupted.
>:$51,1*@
5$0'DWD%UHDN
ۑۑۑ'DWD/RDG
3OHDVH:DLW͐
The data consists of factory data (Factory) and user data (User). In the event that RAM
data is corrupted, data that is not corrupted in the user data or the factory data is
loaded to RAM. (User data has a priority)
In the event that both data is corrupted, RAM data is set as initial value.
It displays the following window upon completion of setting RAM data. Press [OK]
switch.
ʊʊʊ in window indicates the source data from which data is loaded to RAM.
>:$51,1*@
5$0'DWD%UHDN
ۑۑۑ'DWD/RDG
&RPSOHWH