Ikegami OCP-300, Руководство по эксплуатации

Страница: 58 / 274

4-8 4. LCD Menu
The page can be switched as follows by pressing the switch.
Pressing any one selection switch of Ped, Black Set, Flare, Gamma, Gain, Flexible Mode
and Shutter of Video1 will display the adjustment item on the white bar part. The sub
selection switch control data or mode will be displayed on the bottom of it and the
related ON/OFF switch on the right. Turn the rotary encoder knobs (RE) 1, 2, 3, and 4
and adjust it. The control data is the number expressed in percentage of -100 to +100
except for some items. (at the time of normal display mode).
Moreover, the deflection from the settings (or value adjusted automatically in auto
setup mode) registered by the manual set by setup can also be displayed (at the time of
offset display mode). It can be checked how much it is adjusted from the settings
registered by the manual set at the time of this mode at a glance. When the display is
"0", it means being in the registered established state.
The number becomes white at the time of normal display mode and the number
becomes blue at the time of offset display mode.