Ikegami OCP-300, Руководство по эксплуатации

Страница: 24 / 274

2-4 2. The Name and Function of Each Part
ն MODE switch
࣭
CAP switch
Sets the optical filter in the CAP position and makes the iris of the lens closed.
࣭
BARS switch
Makes the video output signals the color bar signals.
࣭
CAL switch
Inputs 100% or 200% of the CAL signal into the graphic processing of the camera
head.
If the switch is pushed, it will change in order of CAL OFF (putting out lights)
->CAL100% (lighting) -> CAL200% (blink) -> CAL OFF (putting out lights). Moreover,
the guard by long push can also be done to CAL200%.
շ
AWB/ABB switch
Performs AWB (automatic white balance) or ABB (auto black balance).
When the execution is completed, the lamp goes out, and when it is NG, it blinks. If NG
is confirmed, please push again the blinking switch, and cancel NG status.
In addition, the execution of Quick Auto Setup/Auto Black Shade is possible by long
push of the AWB switch/the ABB switch, respectively.
Caution
㸸
Depending on the setup of the camera and panel config, it may not operate by
long push.
Caution