Ikegami OCP-300, Руководство по эксплуатации

Страница: 211 / 274

20. Option function 20-7
>:$51,1*@
'23(5$7,2102'(
20.2. Camera Selection Function and Multi Function
OCP-300 is equipped with the camera selection function with which you can select a
single camera to operate from 10 cameras, and the multi function with which you can
select multiple cameras to operate simultaneously.
Enabling each function requires downloading the paid Camera Select KEY file for the
camera selection function, and the paid Multi KEY file for the multi function.
Caution
The Multi KEY filemust be loaded in a state that the Camera Select KEY is
enabled.
Caution
The camera selection function and the multi function are available only
during operation in ARC network or Ethernet network.
20.2.1 Setting of Camera Selection Function
Panel configuration has to be set for using the camera selection function and the multi
function.
The camera selection function and the multi function becomes available by setting the
[OCP Mode] setting located on Control of SETTING page in the panel configuration to
[SEL].
Assign [SEL] to either one of F1, F2, F3 or F4 with the SW located on CUSTOMIZE
page in the panel configuration, followed by pressing the switch to display the window
for [Select] which enables setting of the camera selection function and the multi
function, in order to display the setting screen.
Reference
: Please refer to "21.1.3 Setting Item" for detail setting method.