UK
13
8.2 Single axis inclination sensor ± 0...360°
The sensor is mounted vertically� A clockwise rotation around the Z-axis of the
sensor increases the angle value from 0���360°� When the male connector is
pointing downwards, the output is 0°�
Z = 0°
Z = 359,9°/
8.3 Default Factory Settings
Meaning
Object
Value
Type of unit
1000h
0x2019A – two measurement
axes
0x1019A – one measurement axis
Cyclic timer
2200h
0Ah (10ms)
Resolution
6000h
0Ah (0�01°)
Node number
3000h
0x9h (Node number 10)
baud rate
3001h
03h (125 kB)
The factory settings can be restored at any time� Only a few parameters need to
be reprogrammed to make the inclination sensors compatible with the controller or
the existing CAN bus (→ 9.11 Object 1011h - Restore Parameters).
Содержание JD
Страница 1: ...Device manual Inclination sensor JD with CANopen interface 80279676 00 12 2020 UK...
Страница 43: ...UK 43...