IFM JD, Руководство по эксплуатации устройства

Страница: 26 / 43

26
Sub-index Meaning Data type Default value Access
0 – Unsigned 16 0xA (10ms) rw
9.17 Object 2300h - Save Parameter with Reset
This object stores all parameters in the non-volatile memory� All parameters are
saved with an additional reset executed afterwards�
Sub-index Meaning Data type Default value Access
0 Access code Unsigned 32 55AAAA55h wo
9.18 Object 2600h - Preset X-Axis (± 90º Version) / Preset (360º Version)
In JD2xxx inclination sensors, this object sets the X-axis to the required value�
In JD1xxx inclination sensors, this object sets the Z-axis to the required value�
It is hard-wired with the objects 6012 and 6112�
Sub-index Meaning Data type Default value Access
0 - Integer 16 - rw
The valid preset value ranges depend on the current resolution of the inclination
sensor� If the preset value is outside the range, an error message appears�
Resolution Preset range (decimal)
Type JD2xxx
1° ± 90
0�1° ± 900
0�01 (default) ± 9000
9.19 Object 2601h - Preset Y axis
This object sets the Y-axis to a required value� It is hard-wired with objects 6022
and 6122�
Sub-index Meaning Data type Default value Access
0 – Integer 16 - rw
The valid preset value ranges depend on the current resolution of the unit� If the
preset value is outside the range, an error message appears�
After setting the preset value, a memory command is required to set the preset
value permanently�
9.20 Object 2700h Fast Bootup Enable
This object can be used to change the time between the connection of the supply
voltage and the point of time when the first angle values are sent�
After the power supply is switched on, it takes about 1200 ms before the sensor
provides the angle values via CANopen�
The sensor can send the CANopen files earlier if the object is set to 1� This acti-