ifm
Device manual AS-i M4 Gateway Profibus DPV1 (AC1375, AC1376)
2012-02-23
Function
Introduction AS-i data
37
IO code
(hex)
ID code
(hex)
ext. ID
code
2
(hex)
Meaning
7 E
2
electronic
reverser
7
E
3
electronic direct starter with brake
7
E
4
electronic reverser with brake
7
E
5
electronic direct starter with accessories
7
E
6
electronic reverser with accessories
8
1
x
4 binary outputs for 2 dual-signal actuators
B 1
x
dual-signal actuator with feedback:
2 binary o 2 binary inputs
B A
5
slave operates in the "extended addressing mode" (B slave or A/B slave);
supports combined transaction type 2
B A
E
slave operates in the "extended addressing mode" (B slave or A/B slave);
2 binary o 2 binary inputs (e.g. AC2086 module)
D 1
x
single actuator with monitoring:
1 binary 3 binary inputs
x = any value (0...F)
Devices with M4 master profile enable connection of slaves with more than 4 digital inputs/outputs.
The transmission is combined: Part of the data transmission is carried out via the digital bits D0...D3,
another part via the "analogue" channels.
Info
The more data is transmitted, the longer it takes until all data of a slave has been transmitted.
Cycle time single slave = 5 ms
Cycle time A/B slave (if address is only assigned to A or B slave) = 5 ms
Cycle time A/B slave (if address is assigned to A and B slave) = 10 ms
The cycle time for CTT transmission is a multiple of these values for individual data.
CTT = Combined Transaction Type
