ICP DAS USA PIR-130-AC Скачать руководство пользователя страница 27

Страница: 27 / 93

PIR-130-AC/DC User Manual

Ver. 1.4.0, 2020/07/28

27/93

2.3

$AA5

Description:

This command is used to read the

current

reset status for a specified module.

Syntax:

$AA5[CHKSUM](CR)

Delimiter character

The address of the module to be read in hexadecimal format (00 to FF)

The command to read the reset status of the module

Response:

Valid Command:

!AAS[CHKSUM](CR)

Invalid Command:

?AA[CHKSUM](CR)

Delimiter character to indicate that the command was valid

Delimiter character to indicate that the command was invalid

The address of the responding module in hexadecimal format (00 to FF)

The reset status of the module:
0: This is

NOT

the first time the command has been sent since the module was

powered on, which denotes that there has been no module reset since the last $AA5
command was sent.

1: This is the first time the $AA5 command has been sent since the module was

powered on.

There will be no response if the command syntax is incorrect, there is a communication error, or
there is no module with the specified address.

Examples:

Command: $015

Response: !011

Reads the reset status for module 01 and returns a response indicating that the
command was valid, and that it is the first time the $AA5 command has been sent
since the module was powered on.

Содержание PIR-130-AC






























































































Результаты поиска

Содержание PIR-130-AC

Отзывы:

Похожие инструкции для PIR-130-AC

Бренды по названию

Популярные бренды

ICP DAS USA PIR-130-AC, Руководство пользователя

Результаты поиска

Содержание PIR-130-AC

Отзывы:

Похожие инструкции для PIR-130-AC

Бренды по названию

Популярные бренды