ICP DAS USA I-7021 Скачать руководство пользователя

Страница: 59 / 187

I-7021/22/24, M-7022/24/28 User Manual, Rev: B2.3

2.3 #AAN

Description:

Reads the counter data of a specified digital input channel.

Syntax:

#AAN[CHKSUM](CR)

Delimiter character

Address of the module to be read (00 to FF)

The channel to be read, zero based.

Response:

Valid Command:

!AA(Data)[CHKSUM](CR)

Invalid Command:

?AA[CHKSUM](CR)

Delimiter character for a valid command

Delimiter character for an invalid command. An
invalid command is returned if the specified
channel is incorrect.

Address of the module in hexadecimal format
(00 to FF)

(Data)

Five digits data of the counter value of the
specified channel.

There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.

I-7024R
M-7024R

Содержание I-7021




























































































































































































Результаты поиска

Содержание I-7021

Отзывы:

Похожие инструкции для I-7021

Бренды по названию

Популярные бренды

ICP DAS USA I-7021, Руководство пользователя

Результаты поиска

Содержание I-7021

Отзывы:

Похожие инструкции для I-7021

Бренды по названию

Популярные бренды