ICP CON I-7550E, Руководство пользователя, Страница: 67 / 102

I-7550E PROFIBUS/Ethernet Converter User Manual
(Version 1.00, June/2014)
PAGE: 67
Figure 69 Receive “ICPDASTest” in the input data area
The user also can receive the information of Data in the input data area of
“System setting module”(Please refer to section3.3.2) as shown
Table 28.
Table 28 Receive the data in the input data area of system setting module
Module Byte Data type Representation Value
System setting
module
Input 0 Byte Hex 0x01
Input 1 Word Hex 0x00
Input 3 Word Hex 0x00
Input 5 Word Hex 0x00
Input 7 Word Hex 0x01
Input 8 Byte Hex 0x00
Input 9 Word Hex 0x00
Input 11 Byte Hex 0x01
Input 12 Byte Hex 0x00
Input 13 Word Hex 0x0A
Input 15 Byte Hex 0x0A
4.8.2 The PROFIBUS Master sends data to UDPclient
Note: If UDP client device never sent data to the I-7550E, the I-7550E is
impossible to send (response) data to UDP client device.
-- Set the output data area of “System setting module”.
In section 4.8.1, we have already set Byte 0 of “System setting module” as