ICP CON I-7550E, Руководство пользователя, Страница: 31 / 102

I-7550E PROFIBUS/Ethernet Converter User Manual
(Version 1.00, June/2014)
PAGE: 31
Table 15 The value of output area of “System setting module”
Module Byte Data type Representation Value
System setting
module
Output 0 Byte Hex 0x01
Output 1 Byte Hex 0x00→ 0x01
Output 2 Byte Hex 0x00
Output 3 Byte Hex 0x07
Output 4 Word Hex 0x00
Output 6 Word Hex 0x14
Output 8 Byte Hex 0x01
Output 9 Byte Hex 0x00
Output 10 Byte Hex 0x14
3.4.2 Output data with Combine Method
The I-7550E provides “Combined Method” that can combine the data from
PROFIBUS Master and sends to Ethernet device at once.
In this example, we assume the I-7550E is configured output data length as 220
Bytes, and the user wants to send 300 Bytes package to Ethernet device with
connection ID 11. The PROFIBUS Master needs to send 2 packages to the I-
7550E, and these 2 output data of “System setting module” are as shown
Table
16 and Table 17 .
It is very import that Byte 3
、
Byte 4
、
Byte 6
、
Byte 8 must be the same in 2
package header. If there are different in these values, the I-7550E will ignore
these data and sends diagnostic message to the PROFIBUS Master.
Table 16 The value of output area for 1
st
package
Module Byte Data type Representation Value
System setting
module
Output 0 Byte Hex 0x01
Output 1 Byte Hex 0x00→ 0x01
Output 2 Byte Hex 0x00
Output 3 Byte Hex 0x0B
Output 4 Word Hex 0x01
Output 6 Word Hex 0x12C
Output 8 Byte Hex 0x02
Output 9 Byte Hex 0x00
Output 10 Byte Hex 0xDC