ICP CON I-7550E Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 102

ICP CON I-7550E Скачать руководство пользователя страница 2

I-7550E PROFIBUS/Ethernet Converter User Manual

(Version 1.00, June/2014)

PAGE: 2

Warranty

All products manufactured by ICP DAS are under warranty regarding
defective materials for a period of one year from the date of delivery to the
original purchaser.

Warning

ICP DAS assumes no liability for damages resulting from the use of this
product. ICP DAS reserves the right to change this manual at any time
without notice. The information furnished by ICP DAS is believed to be
accurate and reliable. However, no responsibility is assumed by ICP DAS
for its use, or for any infringements of patents or other right of third parties
resulting from its use.

Copyright

Copyright 2014 by ICP DAS. All rights are reserved.

Trademark

The names used for identification only may be registered trademarks of
their respective companies.

List of Revision

Date

Author

Version

Revision

2014/06/10

Luke

1.00

Release

«
1
2
3
4
...
»

Содержание I-7550E







































































































Отзывы:

Нет отзывов