ICP CON I-7550E, Руководство пользователя, Страница: 60 / 102

I-7550E PROFIBUS/Ethernet Converter User Manual
(Version 1.00, June/2014)
PAGE: 60
“System setting module”(Please refer to section3.3.2) as shown
Table 27 .
Table 27 Receive the data in the input data area of system setting module
Module Byte Data type Representation Value
System setting
module
Input 0 Byte Hex 0x01
Input 1 Word Hex 0x00
Input 3 Word Hex 0x01
Input 5 Word Hex 0x00
Input 7 Word Hex 0x09
Input 8 Byte Hex 0x00
Input 9 Word Hex 0x00
Input 11 Byte Hex 0x01
Input 12 Byte Hex 0x00
Input 13 Word Hex 0x0A
Input 15 Byte Hex 0x0A
4.8 Data exchange example—I-7550E is as UDP Server
In this example an UDP Client device simulated by a PC program sends data and
receives response message from a PROFIBUS Master via the I-7550E converter.
In the following examples the CIF50-PB PROFIBUS Master card from Hilscher is
used. The configuration and communication is done by the program “SyCon”
provided by Hilscher.
Step 1: Copy the GSD file and assign the I-7550E a valid station address
(Please refer to the section 4.2 GSD file).
Step 2: Connect I-7550E module to Ethernet and the PROFIBUS port to a
PROFIBUS Master ( Figure 58 ).