ICP CON I-7550E, Руководство пользователя, Страница: 42 / 102

I-7550E PROFIBUS/Ethernet Converter User Manual
(Version 1.00, June/2014)
PAGE: 42
receives response message from a PROFIBUS Master via the I-7550E converter.
In the following examples the CIF50-PB PROFIBUS Master card from Hilscher is
used. The configuration and communication is done by the program “SyCon”
provided by Hilscher.
Step 1: Copy the GSD file and assign the I-7550E a valid station address
(Please refer to the section 4.2 GSD file).
Step 2: Connect I-7550E module to Ethernet and the PROFIBUS port to a
PROFIBUS Master ( Figure 30 ).
Figure 30 Wiring diagram between PC and I-7550E
Step 3: Set the parameters of the I-7550E.We just need to configure the I/O
length of Input/Output. The user can choose the I/O length depended
on their requirement. In this example, we need 10 Bytes for
Input/Output as shown
Figure 31
and
Figure 32

Select “System setting” module: “System setting” module always has
to be selected otherwise no communication can be established
between the converter and the Ethernet network.

Select “10 Byte In” module and “10 Byte Out” module.