Icom MarineComander MXS-5000, Инструкция по эксплуатации

Страница: 83 / 194

3-11
3
RADAR OPERATION
■
Acquire Target function
(MENU w Acquire Target...)
Put this cursor on the target
Put this cursor on the target
<Acquire Target function menu>
By automatically tracking the target, the Closest Point
of Approach (CPA) and the Time to Closest Point of
Approach (TCPA) limit of a own ship and a target are
calculated.
ATA tells about to alarm sound, when both CPA and
TCPA becomes below a setting value (the approach
watch area).
The range of the target which can be registered is
taken as a target with a highest luminosity level of
0.1–16 nm.
• Max. 10 ATA targets can be plotted on the screen.
• Plot positions shall be identified by an approved
symbol marks (p. 3-29, 3-31) and associated plot
number.
• The vector origin will move across the screen at a
rate and direction defined by the calculated true
or relative course and speed.
• The vector will be displayed on the target.
• Display accuracy may increase by the self-ship
and course change of target or acceleration,
slowdown, etc.
•
Tracking the target
q
Push [MENU], and then rotate [DIAL] until the “Ac -
quire Target” becomes highlighted.
w
Push [ENTER].
• A white squre cursor appears on the screen.
e
Push [  ] to move the “
M
” cursor on the
desired target.
r
Push [ENTER] to start tracking the target.
The target can be also tracked as below.
q
Push [

] to move the “+” cursor on the de -
sired target.
w Push [SUB], select [Acquire Target], and then push
[ENTER].
e
Select “OK,” and then push [ENTER].
• Canceling the tracking
q
Push [  ] to move the “+” cursor on a track -
ing target.
w Push [SUB], select [Clear Target], and then push
[ENTER].
e
Select “OK,” and then push [ENTER].
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
MENU
WPT
FOCUS
LAYOUT
MOB
CLEAR
SUB
BRILL
u
[DIAL]/
[ENTER]
[CLEAR]
[MENU]
[ ���� ]
[LAYOUT]