Icom MarineComander MXS-5000, Инструкция по эксплуатации

Страница: 34 / 194

2-18
2
PLOTTER OPERATION
Track function
■
(MENU
w
Track)
MENU
WPT
FOCUS
LAYOUT
MOB
CLEAR
SUB
BRILL
RANGE
[DIAL]/
[ENTER]
[CLEAR]
[MENU]
<Start Track menu>
When “Save...” is selected.
<Stop Track menu>
The system stores and plots maximum 10 track con -
sisting of up to 1,000 points in a track through which
the vessel passed.
If the number of the points exceeds 1,000, excess track
data is deleted in chronological order.
The track data is updated at specified tracking inter-
vals. (p. 2-23)
Note that longer tracking (track update) intervals allow
the system to cover a longer track, but may cause a
lower resolution of the track image when zoomed in.
Start Track D
(MENU w Navigation u Start Track)
Push [MENU], then rotate [DIAL] until the “Track”
q
menu is highlighted, then push [ENTER].
Rotate [DIAL] until the “Start Track” menu is high-
w
lighted, then push [ENTER].
• The track function starts.
NOTE:
When 10 track is stored, the track function
cannot start. In this case, delete one track data
before starting the track function.
Stop Track
D
(MENU w Navigation u Stop Track)
To cancel the tracking, follow the steps as described
below.
Push [MENU], then rotate [DIAL] until the “Track”
q
menu is highlighted, then push [ENTER].
Rotate [DIAL] until the “Stop Track” menu is high-
w
lighted, then push [ENTER].
Rotate [DIAL] to select “Save...” or “Without Save.”
e
When “Save...” is selected in step
r e
, the “Save Track”
screen appears. Rotate [DIAL ] to select “Save,” then
push [ENTER] to save the route and return to the
previous screen.
• If you change the contents, see the next page.
• If “Cancel” is selected, the setting will be cancelled.
When “Without Save” is selected in step
e
, track
operation is cancelled and return to the previous
screen. In this case, the tracking data is not stored.
•
Save Track screen