Icom MarineComander MXS-5000, Инструкция по эксплуатации

Страница: 26 / 194

2-10
2
PLOTTER OPERATION
MENU
WPT
FOCUS
LAYOUT
MOB
CLEAR
SUB
BRILL
RANGE
[DIAL]/
[ENTER]
[CLEAR]
[MENU]
[
ÙÚΩ≈
]
Cursor appears
Waypoint is created
Push
Push
Push
Push
to move
the cursor
Cursor menu
appears
The Route navigation means that the vessel is navi-
gated via some Waypoints to the destination.
D
Creating navigation routes
(MENU w Navigation u Create Route...)
You can create up to 150 navigation routes, each of
which consists of up to 50 waypoints.
If you try to create the 151th route, an error message
will be displayed.
The created route can be checked on the Route List
screen. (p. 2-14)
Push [MENU], then rotate [DIAL] until the “Naviga-
q
tion” menu is highlighted, then push [ENTER].
Rotate [DIAL] until the “Create Route...” menu is
w
highlighted, then push [ENTER].
• Cursor appears.
Push
e
[ Ù], [ Ú], [ Ω] or [ ≈] to move the cursor to the
point where you want to begin the route, and push
[ENTER] .
• If the cursor points to the present waypoint, the cursor
menu shows “At Way point” instead of “At Cursor.” In this
case, the navigation route will be created using the pres-
ent waypoint.
Push
r
[ Ù], [ Ú], [ Ω] or [ ≈] to move the cursor to the
next waypoint, and push [ENTER].
• Up to 50 waypoints can be create in one route.
• A blue frag appears on the created waypoint.
• A route between the waypoints are shown as black solid
line. (default)
t
When you finish to create the route, rotate [DIAL]
until “Save” is highlighted on the cursor menu, and
push [ENTER].
• “Save Route” screen appears.
NOTE:
When you cancel the last created way-
point, rotate [DIAL] until “Undo” becomes high-
lighted on the cursor menu, and push [ENTER].
y
Rotate [DIAL] to select “Save,” then push [ENTER]
to save the route and return to the previous screen.
• If “Cancel” is selected, the setting will be cancelled.
• If you change the route contents, see the next page.
Route navigation function
■
(MENU
w
Navigation)