Icom MarineComander MXS-5000, Инструкция по эксплуатации

Страница: 106 / 194

3-34
3
RADAR OPERATION
■
Cursor menu operation
• Go to Cursor
(CURSOR MENU w Go to Cursor)
The Cursor navigation means that the vessel is navi-
gated from the current position to the cursor position
(within one section only).
➥
After pushing [ENTER], the Cursor navigation starts.
• See page 2-12 to stop the navigation.
•
Add Waypoint
(CURSOR MENU w Add Waypoint...)
The cursor position information can be created as a
waypoint.
q
After pushing [ENTER], t he Waypoint setting screen
appears.
w
Rotate [DIAL] to select “Save,” and then push [EN -
TER] to save the Waypoint and return to the previ-
ous screen.
• If “Cancel” is selected, the setting will be cancelled.
• To change the waypoint contents, see the page 2-7.
• Add Memo...
(CURSOR MENU w Add Memo...)
The Memo function allows you to save a short sen-
tence of up to 400 characters, containing position data
and date to the cursor position. A picture can be at-
tached to each memo.
q
After pushing [ENTER], the Memo edit screen ap-
pears.
w
Rotate [DIAL] to select “Save,” and then push [EN -
TER] to save the contents and return to the previous
screen.
• If “Cancel” is selected, the setting will be cancelled.
• To change the memo contents, see the page 5-28.
• Acquire Target
(CURSOR MENU w Acquire Target)
The target can be tracked as below. See the page
3-11 for details.
q
Push [  ] to move the “+” cursor on the de -
sired target.
w
Push [SUB], select [Acquire Target], and then push
[ENTER].
e
Select “OK,” and then push [ENTER] to start track -
ing the target.
• Unselect
(CURSOR MENU w Unselect)
When ATA or AIS information screen is displayed on
the lower-right of the screen, it will be cancelled after
selecting “Unselect.”
<Cursor menu – On the Radar display>
On the Radar display D
The cursor menu on the radar display includes the Go
to Cursor, Add Waypoint, Add Memo, Acquire Target
and Unselect.
When the cursor is displayed, push [SUB] to display
q
the Radar display cursor menu.
Rotate [DIAL] until the desired menu is highlighted,
w
and then push [ENTER].