Icom MarineComander MXS-5000 Скачать руководство пользователя страница 30

Страница: 30 / 194

2-14

PLOTTER OPERATION

■

Route navigation function (Continued)

MENU

WPT

FOCUS

LAYOUT

MOB

CLEAR

SUB

BRILL

RANGE

[DIAL]/
[ENTER]

[CLEAR]

[SUB]

[MENU]

• Route List

—

View Detail

You can check a route detail information on the Route
List Sub Menu screen.

When the Route List screen is displayed, rotate

[DIAL] until the desired route is highlighted, then
push [SUB].

• The Route List Sub Menu screen is displayed.

Push [ENTER] to enter the “View Detail...” menu.

Rotate [DIAL] to select the waypoint of the route to

show its detail information.

Push [CLEAR] to return to the previous screen.

NOTE:

When the Route Detail screen is displayed,

pushing [

Ù] or

[

Ú] sequentially selects

the next (or

previous) waypoint.

• Route List

—

Go on Chart

This function enables the cursor to move to the start
point of the selected route on the plotter display.

When the Route List screen is displayed, rotate

[DIAL] until the desired route is highlighted, then
push [SUB].

• The Route List Sub Menu screen is displayed.

Rotate [DIAL] until the “Go on Chart” menu is high-

lighted, then push [ENTER].

• The Route List Sub Menu screen disappears, and the

cursor automatically moves to the start point of the se-
lected route.

Push

•

Route detail screen

When the “View Detail” menu is selected.

Route List

(MENU

Navigation

Route List...)

The created route information can be checked or ed-
ited.

Push [MENU], then rotate [DIAL] until the “Naviga-

tion” menu is highlighted, then push [ENTER].
Rotate [DIAL] until the “Route List...” menu is high-

lighted, then push [ENTER].

• The Route List screen is displayed.
• When [SUB] is pushed, the following operations can be

made:

    - View Detail... (p. 2-14)
    - Go on Chart (p. 2-14)
    - Follow Route (p. 2-15)
    - Reverse Route (p. 2-15)
    - Edit Route Info... (p. 2-16)
    - Erase Route (p. 2-17)
    - Erase All Route (p. 2-17)

Push [CLEAR] to return to the previous screen.

<Route List

—

View Detail menu>

<Route List

—

Go on Chart menu>

Содержание MarineComander MXS-5000



































































































































































































Результаты поиска

Содержание MarineComander MXS-5000

Отзывы:

Похожие инструкции для MarineComander MXS-5000

Бренды по названию

Популярные бренды

Icom MarineComander MXS-5000, Инструкция по эксплуатации

Результаты поиска

Содержание MarineComander MXS-5000

Отзывы:

Похожие инструкции для MarineComander MXS-5000

Бренды по названию

Популярные бренды