Icom MarineComander MXS-5000, Инструкция по эксплуатации

Страница: 13 / 194

1-11
1
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
If the connected transceiver has received a DSC call,
you can check the DSC call log in this screen.
Rotate [DIAL] to select the first icon from the right.
q
• The outside frame of the active icon changes to white.
Push [ENTER] to enter the Received Call Log
w
menu.
Rotate [DIAL] to select a received Call.
e
r
When the selected call included its position data,
push [ENTER] to put the transmitted station’s posi -
tion on the map when the Call has been transmit-
ted.
Or push [SUB] to open the Sub menu.
• The Sub Menu includes Filter, Send ACK, Go on Chart,
Register ID, Erase Message and Erase All Message.
y
Push [CLEAR] to exit the screen and return to the
Focus bar.
Sounder Icon shows the transducer is properly con-
nected.
• Sounder Icon
When Icom transceiver is connected and it’s power
ON, transceiver icon can be selected.
Rotate [DIAL] to select the fifth icon from the left.
q
• The outside frame of the active icon changes to white.
Push [ENTER] to enter the Send DSC menu.
w
Rotate [DIAL] to select the desired call, “Individual
e
Call,” “Group Call,” “All Ships Call,” “Position Re-
quest,” “Position Report” or “Polling Request.”
• The selectable calls differ, depending on the connected
transceiver.
• The display guide shows the operating guidance. The
operations differ, depending on the selected DSC call.
• If desired, push [CLEAR] to exit the screen and return to
the Focus bar.
• Send DSC
• Received Call Log
Push