Icom MarineComander MXS-5000 Скачать руководство пользователя страница 38

Страница: 38 / 194

2-22

PLOTTER OPERATION

• Track List

—

Erase Track list

A track list can be erased on the Track List Sub Menu
screen.

When the Track List screen is displayed, rotate

[DIAL] until the desired track is highlighted, then
push [SUB].

• The Track List Sub Menu screen is displayed.

Rotate [DIAL] until the “Erase Track” menu is high-

lighted, then push [ENTER].

Rotate [DIAL

]

to select “OK,” then push [ENTER] to

erase the track and return to the previous screen.

• If “Cancel” is selected, the track erasing will be can

celled.

• Track List

—

Erase All Track list

All track list can be erased on the Track List Sub Menu
screen.

When the Track List screen is displayed, rotate

[DIAL] until the desired track is highlighted, then
push [SUB].

• The Track List Sub Menu screen is displayed.

Rotate [DIAL] until the “Erase All Track” menu is

highlighted, then push [ENTER].

Rotate [DIAL

]

to select “OK,” then push [ENTER] to

erase all track and return to the previous screen.

• If “Cancel” is selected, the track erasing will be can

celled.

• Track List

—

Change Route...

This function enables a Waypoint to be automatically
added to the saved track line.

When the Track List screen is displayed, rotate

[DIAL] until the desired track is highlighted, then
push [SUB].
Rotate [DIAL] until the “Change Route” menu is

highlighted, then push [ENTER].

• The Change Route screen is displayed.

Rotate [DIAL] to select “OK,” then push [ENTER].

• The Save Route screen is displayed.

Edit Name, Comment or select Color, if necessary.

(p. 2-21)

If you don’t change the contents, go to step

Rotate [DIAL

]

to select “Save,” then push [ENTER]

to save the route and return to the previous screen.

• If “Cancel” is selected, the setting will be cancelled.

NOTE:

The changed route may differ from the ac-

tual track. Before starting the navigation, be sure to
check the changed route is safe.

Track function (Continued)

■

<Track List

—

Change Route... menu>

<Track List

—

Erase Track list menu>

<Track List

—

Erase All Track list menu>

Содержание MarineComander MXS-5000



































































































































































































Результаты поиска

Содержание MarineComander MXS-5000

Отзывы:

Похожие инструкции для MarineComander MXS-5000

Бренды по названию

Популярные бренды

Icom MarineComander MXS-5000, Инструкция по эксплуатации

Результаты поиска

Содержание MarineComander MXS-5000

Отзывы:

Похожие инструкции для MarineComander MXS-5000

Бренды по названию

Популярные бренды